PRIORITIES

PRODUCTS

RAW MATERIALS FOR CHEMICAL INDUSTRIES

ALUMINUM HYDROXIDE

Used as a filler in the production of various aluminum-containing chemical products

RAW MATERIALS FOR RESINS AND COMPOUNDS PRODUCTION 

PHTHALIC ANHYDRIDE

Used in production of PVC plasticizers, polyester resins for coatings and composite materials

PENTAERYTHRITOL

Mainly used for production of alkyd resins, plasticizers and emulsifiers

MICRONIZED PENTAERYTHRITE

Used as a starting material for the production of flame retardant coatings

TECHNICAL DIPENTAERYTHRITE

Used in production of synthetic lubricating oils, alkyd resins and flame retardant coatings

MICRONIZED HEXAMINE (UROTROPIN)

Used as a raw material for the production of composites in rubber and tire industries

FIRE RETARDANTS FOR POLYMER PRODUCTION

DEPOSITIONED ALUMINUM HYDROXIDE

Mainly used for production of alkyd resins, plasticizers and emulsifiers

DRIED ALUMINUM HYDROXIDE

Used as a starting material for production of flame retardant coatings

RAW MATERIALS FOR GLASS INDUSTRY

NITROGEN-CONTAINING CHEMICAL PRODUCTS

CAPROLACTAM

Caprolactam is intended for the production of polyamide-6 and polyamide products based on it (threads, fabrics, polymer composite materials)

HYDROXYLAMINE SULFURIC CRYSTALLINE

Designed for chemical industry, production of caprolactam, varnishes, photo reagents, film and photo materials

CONSTRUCTION MATERIALS

GLASS FABRIC T-10

Structural fiberglass for reinforcing fiberglass of complex shapes. Satin weave, aminosilane lubricant.
Density: 290 g/m2

GLASS FABRIC T-10-14

Structural fiberglass for reinforcing fiberglass of complex shapes. Satin weave, aminosilane lubricant.
Density: 290 g/m2

GLASS FABRIC T-11

Structural fiberglass for reinforcing fiberglass of complex shapes. Has a satin weave. Made on aminosilane lubricant, GVS-9 lubricant can be used.
Density: 385 g/m2

GLASS FABRIC T-13

Structural fiberglass for reinforcing fiberglass for general purposes. It has a linen weave. Manufactured on a direct lubricant.
Density: 260 g/m2

CLOTH SILICA PVP-KT-11

High temperature thermal insulation and thermal protection. Protection against flame, excess heat, splashes of molten metal. Filler of composite materials, etc.

SILICA FABRIC KT-11-30

The fabric is used as high-temperature thermal insulation and thermal protection in various branches of technology. Blankets, curtains and pads to protect against splashes of molten metal, flames and excess heat. Filler for acid-resistant and moisture-resistant radio-technical and radio-transparent materials. Electrical insulation at high temperatures and high humidity.

SILICA FABRIC KT-11-E-230-TO

The material is used as a filler for acid-resistant, as well as moisture-resistant radio-technical and radio-transparent materials. Electrical insulation at high temperatures and high humidity.

RADOPOL A202МC

Unsaturated polyester resin based on orthophthalic acid and standard glycols in styrene. Medium reactive, medium viscosity, non-accelerated, water resistant resin.

RADOPOL A202PМC

Unsaturated polyester resin based on orthophthalic acid and standard glycols in styrene. Medium reactive, medium viscosity, non-accelerated, water resistant resin.

RADOPOL A300РМC

Unsaturated polyester resin based on orthophthalic acid and standard glycols in styrene. Medium reactive, medium viscosity, pre-accelerated waterproof resin with reduced shrinkage.

POLIMAL 104 AWTP

Orthophthalic unsaturated polyester resin with high temperature resistance

POLIMAL VE11М

Vinyl ester flame retardant compound resin based on brominated bisphenol-A

GLASS MAT EMULSION 300 G./M2

Chopped fiberglass non-woven fabric. It is used as a reinforcing material in the manufacture of fiberglass.
Glass mat is very convenient to use, as it can stretch and take complex shapes during impregnation. Suitable for impregnation with polyester and epoxy resins.

GLASS MAT EMULSION 450 G./M2

Chopped fiberglass non-woven fabric. It is used as a reinforcing material in the manufacture of fiberglass.
Glass mat is very convenient to use, as it can stretch and take complex shapes during impregnation. Suitable for impregnation with polyester and epoxy resins.

GLASS MAT EMULSION 600 G./M2

Chopped fiberglass non-woven fabric. It is used as a reinforcing material in the manufacture of fiberglass.
Glass mat is very convenient to use, as it can stretch and take complex shapes during impregnation. Suitable for impregnation with polyester and epoxy resins.

MAT SILICA NEEDLE-PUNCHED М2-10MM

Fibrous needle-punched mat based on silica fiber with a silica fabric sewn on both sides with a density of 300 g/m2.
Mat thickness: 10 mm
Mat width: 920 mm
Mat length: 20 m

MAT SILICA NEEDLE-PUNCHED М2-12MM

Fibrous needle-punched mat based on silica fiber with a silica fabric sewn on both sides with a density of 300 g/m2.
Mat thickness: 12 mm
Mat width: 920 mm
Mat length: 20 m

MAT SILICA NEEDLE-PUNCHED М2-15MM

Fibrous needle-punched mat based on silica fiber with a silica fabric sewn on both sides with a density of 300 g/m2.
Mat thickness: 15 mm
Mat width: 920 mm
Mat length: 20 m

FOIL NEEDLE-PUNCHED BASALT MAT MBOR-5

Needle-punched foil mat is used for thermal insulation of pipelines, ventilation equipment and tanks. It is widely used in the construction of new buildings, the laying of utilities and the construction of industrial facilities.
Roll length: 30 m;
Width: 1.5 m
Thickness: 5 mm.

FOIL NEEDLE-PUNCHED BASALT MAT MBOR-8

Needle-punched foil mat is used for thermal insulation of pipelines, ventilation equipment and tanks. It is widely used in the construction of new buildings, the laying of utilities and the construction of industrial facilities.
Roll length: 20 m;
Width: 1.5 m
Thickness: 8 mm.

FOIL NEEDLE-PUNCHED BASALT MAT MBOR-10

Needle-punched foil mat is used for thermal insulation of pipelines, ventilation equipment and tanks. It is widely used in the construction of new buildings, the laying of utilities and the construction of industrial facilities.
Roll length: 16 m;
Width: 1.5 m
Thickness: 10 mm.

FERTILIZERS

NITROGEN-PHOSPHORUS FERTILIZER (NP)

A concentrated granular fertilizer containing nitrogen, phosphorus and sulfur in an easily absorbed form. It can be applied on all types of soils for a broad range of outdoor and greenhouse crops. It contributes to root development, accelerates ripening and helps prevent blotchy ripening. Sulfur is especially valuable for legumes, cereals and oilseeds, while magnesium is vital for potatoes.

NITROGEN-PHOSPHORUS-POTASSIUM FERTILIZERS (NPK)

A complex mineral fertilizer containing all primary nutrients, i.e., nitrogen, phosphorus and potassium, for healthy growth and development of any plant. It adds value to fruits and vegetables, increases yields and oil content in grains, thus extending storage times and making crops more weather resistant. NPK fertilizers can be applied for all crops on any type of soil.

CARBAMIDE / UREA

All-purpose, high-analysis, water-soluble fertilizer. Can be used as feed additive in cattle production. Widely used in chemical industry for resins synthesis and other applications.

LIQUID NITROGEN FERTILIZERS

Nitrogen fertilizer for vegetable and fruit crops, as well as flowers in open and closed ground with all types of soil.

FOOD INGREDIENTS

MILK PROTEIN CONCENTRATE (MPC)

Milk protein concentrate with a high content of casein and whey proteins. Used in the production of cheese, yogurt, dairy beverages, and sports nutrition. Provides high nutritional value, improves texture, and increases protein content in the final product. 

WHEY PROTEIN CONCENTRATE (WPC)

Whey protein with high biological value and fast digestibility. Applied in sports and functional nutrition, infant formulas, dairy, and confectionery products. Enhances the amino acid profile and ensures stable product structure. 

CASEIN

Slow-digesting milk protein with excellent gel-forming properties. Used in cheese production, protein bars, and clinical nutrition products. Provides prolonged satiety, stable structure, and high nutritional value. 

EGG ALBUMIN

High-quality animal protein with excellent foaming capability. Applied in sports nutrition, desserts, meringues, and confectionery products. Ensures easy digestibility, stable foam, and a rich protein profile. 

COLLAGEN

Hydrolyzed protein for functional and sports nutrition. Used in beverages, bars, capsules, and dietary supplements. Supports joint, skin, and hair health, dissolves easily, and is well absorbed. 

SOY PROTEIN ISOLATE

Plant-based protein with high purity and 90%+ protein content. Applied in sports nutrition, meat alternatives, vegan products, protein bars, and beverages. Provides a complete amino acid profile and improves the structure of the final product. 

GELATIN

Natural animal protein with gelling and structure-forming properties. Used in gummy candies, desserts, meat aspics, and functional foods. Provides elastic texture, clarity, and product stability. 

PECTIN

Plant-based polysaccharide derived from citrus and apples with strong gelling properties. Applied in jams, jellies, yogurts, desserts, and dairy beverages. Ensures natural thickening, texture stabilization, and enhanced flavor perception. 

AGAR-AGAR

Natural hydrocolloid from red seaweed with high gelling ability. Used in confectionery, ice cream, desserts, and dairy products. Provides thermal stability, transparency, and a consistent texture. 

CARRAGEENAN

Sulfated polysaccharide from red seaweed, a natural stabilizer and thickener. Applied in dairy products, desserts, meat products, and beverages. Improves moisture retention, viscosity, and overall product structure. 

GUM

A group of natural thickeners and stabilizers (guar, xanthan). Used in sauces, ice cream, beverages, confectionery, and bakery products. Provides viscosity, emulsion stabilization, and smooth texture. 

PRINCIPLES

CLEAR AND DETAILED INFORMATION ABOUT ALL THE PRODUCTS WE PROVIDE

We believe in long-term relationships with clear perspective which we always build on the basis of mutual trust

FAIR APPROACH TO ALL EFFORTS AND ATTRACTIVE TERMS FOR PARTNERS

We believe that the income of business participants should be distributed in accordance with their efforts

FAVORABLE CONDITIONS FOR ANY FORMAT OF COOPERATION

We set ourselves the task of qualitatively and quantitatively solving all the needs of our customers

TECHNOLOGIES

Opening an office in Kyrgyzstan gives us an advantage in establishing business contacts with enterprises in many countries of Central Asia. By embodying the most modern standards in logistics and production, we are ready to supply the expanded range of chemical products to all target market areas.

CONTACTS

© «ЭКОЛОГИЯ ПРОСТРАНСТВА» Жабык Акционердик Коом / «ЭКОЛОГИЯ ПРОСТРАНСТВА» Закрытое Акционерное Общество / “ECO SPACE” Closed Joint-Stock Company 2022